product description
K series slag remover is a special high-efficiency poly slag slag product imported from Japan KAGALITE Co., Ltd.
Product features and features:
1. The amount of addition is small, the slag-removing ability is strong, and it is easy to remove the shell;
2, the slag is brittle, not sticky; improve the lining life of the lining;
3, the specific gravity is small, the expansion coefficient is large, the coverage is good, and the temperature drop is small when the metal liquid is treated;
4. Effectively covering the surface of the molten metal to reduce the oxidation of alloying elements during smelting;
5, does not change the metal composition, does not pollute the metal liquid;
6. It is smoke-free and dust-free during use, and maintains a clean workshop environment.
Scope of application: carbon steel / stainless steel / alloy steel / high manganese steel / gray cast iron / ductile iron
Instructions for use:
In the electric furnace smelting, after the metal is liquefied, a small amount of slag removing agent is sprinkled on the surface of the molten metal to initially remove the slag, and then a thin layer is covered on the surface of the molten metal to serve as a heat preservation and slag, and the slag is discharged before the furnace is discharged.
Before the molten steel is discharged, a small amount of slag remover can be sprinkled on the bottom of the ladle.
The total amount added is about 0.2% by weight of the molten metal.